First slide

Services By ARC

An unparalleled focus on client satisfaction.

Certifications

WE WORK WITH

  • /Carbon Steel
  • /Stainless Steel
  • /Cunifer/Copper-Nickel
  • /Duplex Materials

    Sizes of pipes:

  • /From ¼” to 68” in diameter

    Thickness of weld procedures:

  • /Up to 90 mm wall thickness for Carbon Steel
  • /25 mm wall thickness for Stainless Steel and Duplex

    Additional services:

  • /In-house PWHT suiting the requirements
  • /

    In-house pressure testing with chart recorders – compliant to client specifications

  • /Small diameter copper tubing
  • /Crimping methodology

STRUCTURAL STEEL

    Steel plates used

  • /Grade A to Grade EH-36 steel plates
  • /Commercial grade profiles
ARC fabricates offshore/onshore structures, platforms, crane pedestals, skids, riser guards, ’J’ tubes, tanks, helidecks, gangways, gas racks, handrail panels based on clients supplied drawings.

PRESSURE VESSELS

ARC has been certified by ASME, receiving both ASME “U” and “R” stamps, respectively, for our systems and facilities.

    Pressure vessel fabrication capabilities:

  • /

    1.5 & 1.8 meter diameter Diving Decompression Chambers

  • /24” Sea water strainers
  • /Equipment Locks
  • /Air receivers in Carbon and Stainless Steel Grades
  • /Fuel Gas Separators
Repairs and modifications of existing pressure vessels are also carried out as per client requirements with design calculations done by third parties.

PROCESS SKIDS

ARC provides the structure and piping fabrication, complete surface treatment and assembly of process skids, including electrical and instrumentation works to meet specific design and process requirements. The equipment installed includes components such as pumps, valves, instrument gauges and miscellaneous supports.

SURFACE TREATMENTS

ARC’s facility includes an enclosed blasting shed, using re-cycled steel grit as an abrasive to do the surface preparation before coating.
ARC sources and uses paints by leading global manufacturers and according to client specifications. All painting is done in an enclosed painting shed, using airless spray.

ON-SITE WORK

ARC provides on-site services to local shipyards of the region, building steel blocks and/or entire vessels as per class-approved and yard-supplied drawings and materials.

    On-site services include:

    Steel work:

  • /

    Renewal of deck, side shells and bottom plating, internal stiffeners, brackets, web and bulkhead plating

  • /

    Deck outfitting and miscellaneous steel work: renewal or repairing ladders, handrails, bollards, platforms, foundations, hatches and covers

    Pipe work:

  • /

    Repair or renew deck, engine room, tank and pump room pipes of various materials

  • /

    Installation of copper tubing and fittings using crimping methodology

    Mechanical Repairs:

  • /Overhauling, repair and testing of valves and fittings
  • /Cleaning, testing and re tubing of heat exchangers
  • /Surface treatment
ARC is also well-equipped and skilled to carry out repairs in Petro-Chemical, Refineries or Industrial facilities:
  • /

    Structural steel repairs, pipe renewals and valve overhauling work on offshore and onshore facilities

  • /

    Repair of pressure vessels on client site to ASME codes of ”R” stamp

WE WORK WITH

  • /Carbon Steel
  • /Stainless Steel
  • /Cunifer/Copper-Nickel
  • /Duplex Materials

    Sizes of pipes:

  • /From ¼” to 68” in diameter

    Thickness of weld procedures:

  • /Up to 90 mm wall thickness for Carbon Steel
  • /25 mm wall thickness for Stainless Steel and Duplex

    Additional services:

  • /In-house PWHT suiting the requirements
  • /

    In-house pressure testing with chart recorders – compliant to client specifications

  • /Small diameter copper tubing
  • /Crimping methodology

STRUCTURAL STEEL

    Steel plates used

  • /Grade A to Grade EH-36 steel plates
  • /Commercial grade profiles
ARC fabricates offshore/onshore structures, platforms, crane pedestals, skids, riser guards, ’J’ tubes, tanks, helidecks, gangways, gas racks, handrail panels based on clients supplied drawings.

PROCESS SKIDS

ARC provides the structure and piping fabrication, complete surface treatment and assembly of process skids, including electrical and instrumentation works to meet specific design and process requirements. The equipment installed includes components such as pumps, valves, instrument gauges and miscellaneous supports.

SURFACE TREATMENTS

ARC’s facility includes an enclosed blasting shed, using re-cycled steel grit as an abrasive to do the surface preparation before coating.
ARC sources and uses paints by leading global manufacturers and according to client specifications. All painting is done in an enclosed painting shed, using airless spray.

ON-SITE WORK

ARC provides on-site services to local shipyards of the region, building steel blocks and/or entire vessels as per class-approved and yard-supplied drawings and materials.

    On-site services include:

    Steel work:

  • /

    Renewal of deck, side shells and bottom plating, internal stiffeners, brackets, web and bulkhead plating

  • /

    Deck outfitting and miscellaneous steel work: renewal or repairing ladders, handrails, bollards, platforms, foundations, hatches and covers

    Pipe work:

  • /

    Repair or renew deck, engine room, tank and pump room pipes of various materials

  • /

    Installation of copper tubing and fittings using crimping methodology

    Mechanical Repairs:

  • /Overhauling, repair and testing of valves and fittings
  • /Cleaning, testing and re tubing of heat exchangers
  • /Surface treatment
ARC is also well-equipped and skilled to carry out repairs in Petro-Chemical, Refineries or Industrial facilities:
  • /

    Structural steel repairs, pipe renewals and valve overhauling work on offshore and onshore facilities

  • /

    Repair of pressure vessels on client site to ASME codes of ”R” stamp